3000W Off-Road Conversion Kit

In stock
Quick Overview

The power and the speed offered by this conversion kit exceeds the road restrictions for electric bikes. It should only be used off-road or on private property.


The kit consists of a 3000W direct drive motor, a 60A controller and a 72V 30AH Lithium-ion battery. Since such a powerful combination cannot be mounted on a regular bike with a regular frame and brakes, this conversion kit comes with a steel frame with a full size inverted triple crown magnesium alloy suspension that has 200mm drop available. The frame also has a steel rear fork and 220mm hydraulic disk brakes.

Once assembled this bike can achieve 180 NM torque: sufficient to climb the steepest off-road trails.

This frame is strong enough for trails but when fully assembled the complete weight will exceed 100 lb and therefore cannot be used as a downhill bike.

The fully charged battery can provide a range between 30 km and 120 km depending on the road conditions and the riding style. The most efficient speed that will yield the biggest range for this bike is between 30 and 40 km/h. When used at its max speed the range can drop more than three times, especially when used on hilly terrain.


  • 3000W direct drive motor 180Nm torque at stall


  • 72V 30AH Lithium-ion cells


  • 72V, 60A

Speed control

  • Power on demand (via throttle grip)

Control Panel

  • Three-button control pod
  • Backlit LCD Display with indicators for speed (inst, avg, max)
  • Trip distance
  • Odometer
  • Battery voltage
  • Power assist level
  • Clock


  • Automatic, 100-240V AC input

Frame Type

  • Carbon steel

Frame Size

  • 51cm (20”) (measured from center of pedal axle to top of seat tube), 80cm (31.5”) stand-over height

Front Wheel

  • 26” double-walled Alex Rims alloy rim, stainless-steel spokes, alloy hub, quick-release skewer

Rear Wheel

  • 26” double-walled Alex Rims alloy rim, stainless-steel spokes, motor hub


  • 26” x 2.5” off-road style

Inner Tubes

  • Schrader valve


  • ZOOM Professional Al Alloy


  • MTB NECO 90mm adjustable


  • VELO Wide, gel-padded

Seat Post

  • PROMAX 320 mm x 30.3 quick-release height adjustment

Front Fork

  • Full size inverted triple crown magnesium alloy suspension with 200mm drop


  • 200mm PROWHEEL Forged Alloy

Bottom Bracket

  • NECO Sealed bearing cartridge type


  • WELLGO cast alloy large-platform


  • SHIMANO 7-Speed Tourney Hyperglide

Rear Derailleur

  • Shimano Tourney


  • SHIMANO Tourney FT55 7 Speed shifter

Front Brake

  • 220mm hydraulic disk brakes

Rear Brake

  • 220mm hydraulic disk brakes


  • KMC 7-Speed chrome plated


  • 100lbs or more for a completed assembly

Maximum Load

  • 114kg (250lb)


  • 80 km/h (50 mph) using motor power only


  • 140km
Write Your Own Review
You're reviewing:3000W Off-Road Conversion Kit